Nabertherm 5-sided Chamber Pottery Kiln: N150

Ideal for the productive studio or school, the 5-sided chamber kiln will heat up quickly, shortening the time of a firing which saves money and gains you time.
This series of kiln are made to last, built with expensive materials and full of accessories that are included in the price. See the expansive list of standard equipment.

The top temperature of the N series is 1300°C. If you fire to high temperatures (high stoneware or porcelain) regularly, then we suggest you consider the N/H range for a top temperature of 1340°C.

Kiln comes with 3 years warranty*.

*does not include element wear, shelf damage or improper use.

Standard Equipment:

• Heating elements on support tubes, good for prolonged element life and better heat distribution.
• 5-sided heating, great for uniform heat.
• Base shelf is silicon carbide, greater strength and long lasting.
• Legs are included * see additional note.
• Door cover made from Stainless Steel.
• Semi-automatic flap on the air-inlet that will close after the initial phase of a firing program (only kilns up to 300 ltrs).
• A motorized flap on the exhaust hole for ventilation (only kilns from 400 ltrs upward).

*This kiln will be in 2 separate parts. The main body will have to be lifted using manual handling equipment to fit the base (legs) underneath.

Why buy a kiln from Hot Clay?

We have an experienced team who will support you every step of the way, including free technical help if you need it. Call Hot Clay on 01934 863040 option 3, and we will find the best setup for you. If you find this kiln cheaper elsewhere, please contact us and we'll do our best to match it.

Electrical:

• 11kW/47.8A 230V single phase. No cable or plug supplied, a qualified electrician is required to wire the kiln.
• 11kW/15.9A 400V (amps per phase) 3 phase, 16 amp 5-pin CEE plug and cable.

Top Temperature: 1300 °C.

Equipment: Type ‘S’ thermocouple.

Dimensions:

• Internal dimensions: 450mm x 530mm x 590mm (W x D x H)
• External dimensions: 760mm x 1130mm x 1570mm (W x D x H)
• Weight: 320kg
• Volume: 150 Litres

Furniture set:

• 4 x 490mm x 400mm x 17mm kiln shelves
• 12 x 50mm and 9 x 100mm shelf props

CE Certified.

Any questions regarding the new controller you are welcome to speak to the technical help line by calling 01934863040 option 3 or emailing info@hot-clay.co.uk

• This kiln will be ordered direct from Nabertherm and the current lead time is approximately 2-4 weeks (This is subject to change depending on availability). Priority is not an option for this item, all other items ordered with the kiln will be sent separately.
• We are pleased to offer free delivery of this kiln to anywhere in the UK, as well as the following European destinations (Mainland only, not islands): Austria, France, Poland, Belgium, Germany, Portugal, Croatia, Hungary, Slovakia, Czech Republic, Ireland, Slovenia, Denmark, Italy, Spain, Estonia, Luxembourg, Sweden, Finland, Netherlands. If you would like this kiln delivered to any destination not listed here, please contact us first before ordering.
• Delivery is kerbside only and does not include installation. Please consider that you may need help to situate the kiln.
• Delivery is an all-day delivery, which you will be contacted by the courier beforehand to arrange.
• Custom delivery can be provided at an additional cost, although this can be very expensive. We may be able to help with advice and quotes using specialist logistical companies.
• When ordering your kiln please state any access requirements at the delivery address in the special instructions.
• If you are in a remote location or have restricted access and require a specialist vehicle, please be aware that this may incur a surcharge.

• Nabertherm Brochure (PDF)