£25.98 ex. VAT
A fine grade plaster used for details moulds and casts.
A plaster with a fine grade of particle size, used for detailed moulds and casting in the ceramics industry. It is highly in absorbent and common uses include, detailed slip moulds, sprig moulds, casting impressions of hand and animal prints.
Technical Information:
Plaster/Water Ratio: 100/70
Working Time: 21 Minutes.
Demould Time: 28 Minutes.
Expansion: 0.2%
Compressive Strength: 13 Mpa.
Shelf Life: 3 Months.
Colour: Off white.
25kg will arrive in a paper bag not a bucket.
For advice and further reading read our 'Using Raw Materials' PDF.
Mixing ratio is 100 plaster to 70 of water, so for the 2.5kg powder in the bucket you would add 1.75Ltrs of water. This will make a shape with a dimension of 280mm x 190mm x 50mm or 2660cm3
The re-useable bucket contains a cup for a simple measurement of 3 cups of plaster to 2 cups of water.
Wear an FFP3/P3 dust mask when mixing powders.
Plaster contains <1% crystalline silica which if inhaled will cause long term lung damage, therefore we recommend the wearing of a FFP3/P3 Mask. Keep working areas free of dust cleaning up with a damp sponge.
In keeping with our overall general advice, we also suggest wearing full PPE mask, safety glasses, gloves in a ventilated area.
It is a sensible precaution for children not to work with raw materials.
See the SDS in the product attachments for more information.
Fabulous product, superb quality and is excellent for casting.
