Protect your kiln shelves from running glazes. Also known as Kiln Wash or Shelf Primer.
£11.77 ex. VAT
Mix equal parts powder and water until smooth. Apply the mixture to the top surface of your kiln shelf using a Hake brush and allow it to dry completely. Once dry, apply a second coat, brushing at right angles to the first coat for even coverage. Use only on the upper surface of the kiln shelf.
It is advisable to put your shelf through a dry firing before taking it to glaze temperatures.
This batt wash will last for several firings or until there is a glaze accident, and areas can be touched up without re-washing the entire shelf if needed.
For advice and further reading, read our 'Using Raw Materials' PDF.
Al2O3 100%.*
*Typical analysis supplied by supplier
Batt Wash presents a hazard as it contains <1% crystalline silica; therefore, we recommend wearing an FFP3/P3 Mask and working in a well-ventilated area. Keep working areas free of dust by cleaning up with a damp sponge
Great must have
No problems with this - did the trick…
Applied two coats of product to kiln base and shelving and was absolutely amazed at result, no problem with any glazing sticking to shelving.
Supplied in powder form it was very easy to add water and mix to smooth consistency. Very simple to apply to batts and the batt wash covers well.
Easy to mix and brush on the shelves. So far so good.
