Mayco Designer Liner

37ml (1.25 fl oz.) squeeze bottle (includes metal writing tip).

Designer Liner is best when used under non-moving transparent or semi-transparent glazes. Fires between 999°C-1222°C (cone 06 - cone 6).

Certified AP Non-toxic. Food Safe and Dinnerware Safe when a clear glaze is applied, as Designer Liners are porous when left unglazed. Find out more about food safety with clays and glazes here.

Helpful Hints

• Remove the white cap, then gently puncture the plastic tip with the metal writer tip.
• After placing the metal tip onto the bottle cap, push the included pin through the small zip-top bag and seal (this makes it easier to keep track of the pin).
• Keep the pin in the metal writer tip when not in use.
• Designer Liner is clay-based. As such, it is the nature to dry quickly, which can promote clogging in the narrow passages of the metal and or plastic tips.
• Apply onto bisque or unfired glaze, and then apply a clear glaze.
• Clear or transparent glazing is necessary for a gloss finish. Designer Liner will fire matte when no glaze is applied over top.
• Design work could be distorted when applied on top of glazes that have a tendency to move.
  Wipe the tip periodically on a damp sponge to keep it clean.
• Keep the metal pin to unclog the tip, and keep the metal writer tip free from debris.
• If the Designer Liner begins to dry in the bottle, you can add a few drops of water to reconstitute the Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.
• Designer Liner is not a dimensional product. If applied too thick or heavy, the Designer Liner will crack and possibly pop off

Mayco Designer Liner SDS