A transparent matt glaze that will diffuse a colour underneath.
Sold as a brush-on-glaze in 200ml pot sizes
Firing Range:
Stable between 1020°C to 1060°C (Cone 06 to Cone 04), but can be fired up to 1100ºC (Cone 03)
Product Description:
Soft, alabaster satin surface.
Lead Free.
Working Notes:
Can be used with other opaque matt glazes like 9107 & 9489
The last photo shows the difference in layers on different bodies - 1 layer on the bottom and 2 on the top.
At 1100°C the glaze turns less milky, but more shiny.
Studio Safety:
Good housekeeping is essential in any pottery studio to minimise inhalation of silica dust. Always clean up with a damp sponge and if any dust from the dried brush-on is airborne. wear an FFP3 mask.
Applying Brush on Glaze:
Remove glaze from pot, stir and agitate the glaze in a larger container, make sure all the material is mixed thoroughly. Whilst keeping the glaze moving, dip brush and hold sideways, in order to keep the material evenly distributed, then apply using confident dabs, move the liquid around and work quickly and smoothly. Botz advise 1 to 2 applications as this glaze needs to be applied thinly, allow to dry between coverings.