Bright Gold Lustre 10%

Size: 2g

Earthenware and Stoneware Ceramics: 690°C - 700°C*

Porcelain: 750°C*

Fire at a rate of 100-220°C an hour.

*Recommended by the supplier

See our working with lustres document in the product attachment for further advice.

These products are ready to use from the bottle but do stir as much as possible with a thin implement. If the lustre proves too thick to be useable then you can use Lustre Thinner.

Use a soft-haired paint brush or liner brush for application. Wares should be clean and dry and brush evenly for best results being careful not to overload with the lustre. Allow the ware to dry completely before placing it in the kiln.

Gold, platinum, bronze and copper do not need to be diluted with thinners. For other colours including red, orange, amber, green, black, blue and the mother of pearl (15%+), it is recommended diluting to at least 10%. 

As some of these products are expensive to use, avoid disappointment by testing before application to the final ware.

See our working with lustres document in the product attachment for further advice.

• Working with Lustres PDF
• Gold Lustre SDS