Vitraglaze Stoneware Layers: Sand Storm

Vitraglaze Stoneware Layers: Sand Storm

Vitraglaze Stoneware Layers: Cappuccino

Vitraglaze Stoneware Layers: Cappuccino

Vitraglaze Stoneware Layers: Yellow Blaze

Looking for something special from your glazes? 

Let us show you how to achieve these amazing effects by layering our Vitraglaze colours!

This set consists of 2 x 250ml stoneware glazes, 1 Rusty Mottle & 1 Limoncello.

was £13.74 Special Price £12.60 £10.50
22 in stock
SKU
F110

Looking for something special from your glazes? 

Let us show you how to achieve these amazing effects by layering our Vitraglaze colours!

This set consists of 2 x 250ml glaze, 1 of each in the following stoneware colours:

Rusty Mottle

Limoncello

As always we want to ensure you are glazing without the guesswork so simply use the following method.

Applying the brush on glaze:

Layering Vitraglaze is best done using brush-on glazes. It is best to have one brush for a light colour and one brush Rusty Mottle and let this dry, this should take between 5 – 10 minutes and then apply two more layers of your second glaze the Limoncello. Clean the glaze from the bottom of your pieces, so you have at least a 1cm gap between the glaze and the base just in case the glaze runs. Make sure to clean the bottom of your piece thoroughly before putting it in the kiln.

Protect your kiln and shelves by testing with small samples before using the glaze on the final wares. We recommend the use of Batt wash to protect shelves and with glaze layering such as this, we also recommend using handmade stoneware bisque dishes to catch any over fluxing glazes.

Firing Schedule:

The photographed pot is on Vitraclay, Studio Throwing Clay, fired to 1250°C

Vitraglaze is lead free and non-toxic.

Write Your Own Review
You're reviewing:Vitraglaze Stoneware Layers: Yellow Blaze
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?