Mayco Designer Liner - clay based and heavily pigmented.
Use this versatile product to create fine detail with lines, dots, and letters.
The metal writer tip allows for ultimate control to draw ultra-fine lines, typography and intricate illustrations. Designer Liner is best when used under non-moving transparent or semi-transparent glazes. Fires between 999C-1222C (cone 06 - cone 6).
Certified AP Non-toxic. Food Safe and Dinnerware Safe when clear glaze is applied as Designer Liners are porous when left unglazed.
1.25 oz squeeze bottle (includes metal writing tip)
Remove the white cap then gently puncture plastic tip with the metal writer tip.
After placing the metal tip onto the bottle cap, push the included pin through the small ziptop bag and seal (this makes it easier to keep track of the pin).
Keep the pin in the metal writer tip when not in use.
Designer Liner is clay based. As such, it is the nature to dry quickly which can promote clogging in the narrow passages of the metal and or plastic tips.
Apply onto bisque or unfired glaze and then apply a clear glaze.
Clear or transparent glazing is necessary for gloss finish. Designer Liner will fire matte when no glaze is applied over top.
Design work could be distorted when applied on top of glazes that have a tendency to move.
Wipe tip periodically on a damp sponge to keep clean.
Keep the metal pin to unclog the tip and keep the metal writer tip free from debris.
If Designer Liner begins to dry in the bottle you can add a few drops of water to reconstitute Designer Liner. Stir and test for proper viscosity. Add water in small amounts to avoid over-thinning the Designer Liner.
Designer Liner is not a dimensional product. If applied too thick or heavy, Designer Liner will crack and possibly pop off.