Hartley & Noble - Over-The-Wheel Standard Tile Batt System

Hartley & Noble - Over-The-Wheel Standard Tile Batt System

Designed specifically for Wheels with NO Batt Pins, and made from premium 15mm MDF. This gives you everything you'll need to keep your Batt in place, and take advantage of Hartley & Noble's tile 

Please note - You will need to measure your wheelhead to ensure that this product will fit as manufacturers do allow for a degree of tolerance. Suitable for wheelheads with a diameter of 305mm.

Items Included:

• 1x Master Batt.
• 1x Stay-Put Batt Rug.
• Your choice of 150mm or 200mm pack of 5 tile inserts (6mm).

The Over-The-Wheel Tile Batt System is designed to be slightly larger than the measurement of your wheelhead. This is to make it easier to apply and remove from your wheelhead. It is normal to have slight movement when first applied, the Stay-Put Batt Rug is designed to soak up any movement once the wheel is spinning, and has been successfully tested throwing up to 10kg of clay.

How To use:

• Soak the Stay-Put Batt Rug in water. 
• Place flat, and smooth out on the wheel head.
• Place the Master Batt on top, with the tile insert.
• Give a little tap to secure it.
• Throw!

Caring for you Batt system:

• Do not leave batts to soak in water, this could cause them to warp and swell
• Wipe clean with a damp sponge to remove excess clay
• Remove from your wheel when not in use
• Do not stack together, dry & store vertically
• Do not use metal scourers or screwdrivers as this can cause damage.